Rgblink VSP 198CVS User Manual Manual de usuario descargar pdf (Pagina 108)

6. System Setup And Operation

How to Realize LAN Remote Control Settings

VSP 198CVS User Manual 108

Secondly refer to router’s instruction (user manual specification), and find out router’s

default network segment.

If router’s default network segment is 192.168.0.1, then it is same to processor IP address

segment, open up windows control software and user can directly control on VSP

198CVS.

If router’s default network segment is 192.168.1.1, then user need to change router’s

default gateway or change processor’s IP, both methods are available, but we suggest to

change processor’s IP.

Method one: Change processor’s IP.

Push the MENU button, and go into items as below image shows. Change processor’s IP

to be 192.168.1.100, confirm and restart the processor, then user can directly control on

VSP 198CVS via windows control software.

Method two: Change router’s gateway.

Type in 192.168.1.1 on the browser and go into router setting.

Type in default account and code (please refer to the router user manual for the

information).

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 121 122

Sin comentarios

Rgblink VSP 198CVS User Manual Manual de usuario Pagina 108